THEORETICAL AND PRACTICAL BASIS OF ROLLED PRODUCTS
Keywords:
composition and properties of rolled metal products, plastic deformation process, rotating drive rollers, rolled body, rolled steel, hardening heat treatment, hardness, macro-and microstructure, performance and quality of finished productsAbstract
The article presents the theoretical and practical basis for the production of rolled products in the conditions of a metallurgical plant. The processes of plastic deformation of bodies between rotating drive rolls are shown. The main results of research on rolled products made of rolled steel are presented. The chemical composition, mechanical properties, macro - and microstructure parameters, and strengthening treatments of locally produced rolled steel were studied. It is shown that after hardening treatment, the strength increases and the quality of rolled products improves.
References
Смирнов В.С. Теория прокатки. – М.: Металлургия, 2007. - 465 с.[
Ширяев П.А. Основы технико-экономического проектирования металлургических заводов. -М.: Металлургия, 2005. - 396 с.
Тилабов Б.К., Мухамедов А.А., Фарманов А.К., Березин В.И. Повышение качества литых деталей песковых насосов // Горный журнал. Цветные металлы. – М., 2009. №8. С.92-94.
Чиченов Н.А. Методы исследования процессов обработки металлов давлением. М.: Металлургия, 2007. - 331 с.[4.c.331]
Поляков М.Г., Никифоров Б.А. Деформация металла в многовалковых калибрах. М.: Металлургия, 2004. - 245 с.
Леванов А.Н., Колмогоров В.Л. Контактное трение в процессах обработки металлов давлением. – М.: Металлургия, 2005. – 426 с.
Бердиев Д.М. Повышение износостойкости сталей при трении о незакрепленные абразивные материалы методом термического упрочнения / Дисс. на соиск. уч. степ. канд. техн. наук. - Ташкент, 2007. - 190 с.
Tilabov B.K. The determination of the causes for premature release from the array of cast cylpebs made from white high chromous cast iron and their subsequent thermal treatment. Известия на Технически университет Габрово. Journal of Technical University of Gabrovo. Bulgaria. Vol.48. 2014. - P.20-24.
Mukhamedov A.A. Heat treatment with double phase recrystallization for improving service properties of machine parts and tools / Heat treatment and technology of surface coating. Materials of the Congress. Vobume v. MOTO. December 11-14. – Moscov, 1990. P.38-39.
Tilabov B.K. Increased durability of iron parts by thermal treatment with double phase recrystallization. European applied sciences. Europaische Fachhochschule. ORT Publishing. Germania, 2015. #8. P.49-53.
